{"id":8405,"date":"2026-09-15T09:03:47","date_gmt":"2026-09-15T06:03:47","guid":{"rendered":"https:\/\/axinar.com\/?page_id=8405"},"modified":"2026-09-15T09:03:47","modified_gmt":"2026-09-15T06:03:47","slug":"custom-sheet-metal-enclosures","status":"publish","type":"page","link":"https:\/\/axinar.com\/en\/oem-manufacturing\/custom-sheet-metal-enclosures","title":{"rendered":"Custom Sheet Metal Enclosures"},"content":{"rendered":"\t\t<div data-elementor-type=\"wp-page\" data-elementor-id=\"8405\" class=\"elementor elementor-8405\">\n\t\t\t\t<div class=\"elementor-element elementor-element-a389f26 e-flex e-con-boxed e-con e-parent\" data-id=\"a389f26\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-a8e9419 elementor-widget elementor-widget-html\" data-id=\"a8e9419\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"html.default\">\n\t\t\t\t\t<style>\n\/* AXINAR OEM buyer-intent pages \u2014 shared system (derived from \/en\/oem-manufacturing) *\/\n:root{--bg:#151616;--bg-card:#232425;--bg-card-hover:#2c2e30;--red:#DD2B1C;--red-dark:#b32215;--white:#fff;--gray-100:#f2f2f2;--gray-300:#999;--gray-500:#7B8189;--gray-700:#333639;--font:'Barlow',sans-serif;--container:90vw;--max-w:1400px}\n*,*::before,*::after{margin:0;padding:0;box-sizing:border-box}\nhtml,body{overflow-x:clip}\nbody{background:var(--bg);color:var(--gray-100);font-family:var(--font);font-size:clamp(14px,0.94vw,18px);line-height:1.7;-webkit-font-smoothing:antialiased}\n.ax main>section,.ax main>.statbar{width:100vw;margin-left:calc(50% - 50vw);margin-right:calc(50% - 50vw)}\n.ax .ax-wrap{width:var(--container);max-width:var(--max-w);margin:0 auto}\n.ax section{padding:clamp(56px,4.8vw,104px) 0}\n.ax a{color:var(--red);text-decoration:none;transition:color .25s}\n.ax a:hover{color:var(--white)}\n.ax h1,.ax h2,.ax h3,.ax h4{color:var(--white);line-height:1.15;font-weight:800}\n.ax p+p{margin-top:1em}\n\/* hero *\/\n.ax .hero{position:relative;padding:clamp(64px,6vw,130px) 0 clamp(48px,4vw,96px);background:linear-gradient(135deg,#1b1c1c 0%,#151616 60%)}\n.ax .hero::after{content:\"\";position:absolute;left:0;right:0;bottom:0;height:1px;background:linear-gradient(90deg,transparent,rgba(221,43,28,.6),transparent)}\n.ax .hero-label{display:inline-block;font-size:.72rem;font-weight:700;letter-spacing:3px;text-transform:uppercase;color:var(--red);margin-bottom:14px}\n.ax .hero h1{font-size:clamp(2.1rem,4.4vw,3.6rem);margin-bottom:18px}\n.ax .hero h1 span{color:var(--red)}\n.ax .hero-sub{font-size:clamp(1rem,1.35vw,1.2rem);color:var(--gray-300);max-width:62ch;margin-bottom:30px}\n.ax .hero-ctas{display:flex;flex-wrap:wrap;gap:14px}\n.ax .btn{display:inline-flex;align-items:center;gap:10px;padding:14px 30px;font-size:.95rem;font-weight:700;letter-spacing:.5px;text-transform:uppercase;transition:all .25s;border:1px solid transparent}\n.ax .btn-primary{background:var(--red);color:var(--white)}\n.ax .btn-primary:hover{background:var(--white);color:var(--red)}\n.ax .btn-ghost{border-color:var(--gray-700);color:var(--gray-100)}\n.ax .btn-ghost:hover{border-color:var(--red);color:var(--white)}\n\/* short answer box, written to be lifted whole by an answer engine *\/\n.ax .answer-box{border-left:3px solid var(--red);background:var(--bg-card);padding:clamp(18px,1.8vw,28px) clamp(20px,2vw,32px)}\n.ax .answer-box .answer-label{font-size:.7rem;font-weight:700;letter-spacing:3px;text-transform:uppercase;color:var(--red);margin-bottom:10px}\n.ax .answer-box p{font-size:clamp(1rem,1.25vw,1.18rem);color:var(--white);max-width:80ch;line-height:1.65}\n.ax .byline{margin-top:18px;font-size:.82rem;color:var(--gray-500);letter-spacing:.3px}\n.ax .byline strong{color:var(--gray-300);font-weight:600}\n.ax .byline a{color:var(--gray-300)}\n.ax .byline a:hover{color:var(--white)}\n\/* stat bar *\/\n.ax .statbar{background:var(--bg-card);border-top:1px solid var(--gray-700);border-bottom:1px solid var(--gray-700)}\n.ax .statbar-inner{width:var(--container);max-width:var(--max-w);margin:0 auto;display:grid;grid-template-columns:repeat(4,1fr);gap:1px;background:var(--gray-700)}\n.ax .stat{background:var(--bg-card);padding:clamp(20px,2vw,34px) clamp(14px,1.6vw,28px)}\n.ax .stat-val{font-size:clamp(1.6rem,2.6vw,2.4rem);font-weight:800;color:var(--white);line-height:1.1}\n.ax .stat-val small{font-size:.5em;font-weight:700;color:var(--red);margin-left:3px;vertical-align:baseline}\n.ax .stat-val small.sym{font-size:1em;color:inherit;margin-left:0}\n.ax .stat-label{font-size:.72rem;letter-spacing:2px;text-transform:uppercase;color:var(--gray-500);margin-top:6px}\n\/* section heads *\/\n.ax .section-label{font-size:.7rem;font-weight:700;letter-spacing:3px;text-transform:uppercase;color:var(--red);margin-bottom:12px}\n.ax .section h2,.ax section>.container>h2{font-size:clamp(1.6rem,2.8vw,2.5rem);margin-bottom:24px}\n.ax .lead{font-size:clamp(1rem,1.2vw,1.12rem);color:var(--gray-100);max-width:78ch}\n.ax .alt{background:#111212}\n.ax .prose{max-width:78ch;color:#cfd1d3}\n.ax .prose strong{color:var(--white)}\n\/* cards *\/\n.ax .grid{display:grid;gap:clamp(14px,1.4vw,24px)}\n.ax .g2{grid-template-columns:repeat(2,1fr)}\n.ax .g3{grid-template-columns:repeat(3,1fr)}\n.ax .g4{grid-template-columns:repeat(4,1fr)}\n.ax .card{background:var(--bg-card);border:1px solid var(--gray-700);padding:clamp(20px,1.9vw,32px);transition:border-color .25s,background .25s}\n.ax .card:hover{border-color:var(--red);background:var(--bg-card-hover)}\n.ax .card h3{font-size:1.05rem;margin-bottom:10px;text-transform:uppercase;letter-spacing:.5px}\n.ax .card p{color:var(--gray-300);font-size:.95rem}\n.ax .step-num{font-size:.75rem;font-weight:800;letter-spacing:2px;color:var(--red);margin-bottom:10px}\n\/* spec table *\/\n.ax .tablewrap{overflow-x:auto;border:1px solid var(--gray-700)}\n.ax table{width:100%;border-collapse:collapse;min-width:560px;font-size:.95rem}\n.ax caption{text-align:left;padding:14px 18px;color:var(--gray-500);font-size:.78rem;letter-spacing:2px;text-transform:uppercase;background:var(--bg-card);border-bottom:1px solid var(--gray-700)}\n.ax th,.ax td{padding:12px 18px;text-align:left;border-bottom:1px solid var(--gray-700);vertical-align:top}\n.ax thead th{background:var(--bg-card);color:var(--white);font-size:.75rem;letter-spacing:2px;text-transform:uppercase}\n.ax tbody tr:last-child td{border-bottom:none}\n.ax tbody td:first-child{color:var(--white);font-weight:600}\n\/* checklist *\/\n.ax .checks{list-style:none;display:grid;gap:10px}\n.ax .checks li{position:relative;padding-left:28px;color:#cfd1d3}\n.ax .checks li::before{content:\"\";position:absolute;left:0;top:.62em;width:10px;height:10px;background:var(--red)}\n.ax .checks li strong{color:var(--white)}\n\/* faq *\/\n.ax .faq details{border:1px solid var(--gray-700);background:var(--bg-card);margin-bottom:10px}\n.ax .faq summary{cursor:pointer;list-style:none;padding:18px clamp(18px,1.6vw,26px);font-weight:700;color:var(--white);display:flex;justify-content:space-between;gap:16px;align-items:flex-start}\n.ax .faq summary::-webkit-details-marker{display:none}\n.ax .faq summary::after{content:\"+\";color:var(--red);font-size:1.3rem;line-height:1;flex-shrink:0}\n.ax .faq details[open] summary::after{content:\"\\2212\"}\n.ax .faq .answer{padding:0 clamp(18px,1.6vw,26px) 20px;color:#cfd1d3}\n.ax .faq .answer p+p{margin-top:.8em}\n\/* related *\/\n.ax .related-grid{display:grid;grid-template-columns:repeat(3,1fr);gap:1px;background:var(--gray-700);border:1px solid var(--gray-700)}\n.ax .related-grid a{background:var(--bg-card);padding:20px 24px;color:var(--gray-100);display:block;transition:background .25s}\n.ax .related-grid a:hover{background:var(--bg-card-hover);color:var(--white)}\n.ax .related-grid span{display:block;font-size:.7rem;letter-spacing:2px;text-transform:uppercase;color:var(--red);margin-bottom:6px}\n\/* cta *\/\n.ax .cta{background:linear-gradient(135deg,#1d1e1e 0%,#151616 70%);border-top:1px solid var(--gray-700)}\n.ax .cta-grid{display:grid;grid-template-columns:1.3fr 1fr;gap:clamp(24px,3vw,56px);align-items:center}\n.ax .cta h2{font-size:clamp(1.5rem,2.4vw,2.2rem)}\n.ax .cta-contact{background:var(--bg-card);border:1px solid var(--gray-700);padding:clamp(22px,2vw,34px)}\n.ax .cta-contact dt{font-size:.7rem;letter-spacing:2px;text-transform:uppercase;color:var(--gray-500);margin-top:14px}\n.ax .cta-contact dt:first-child{margin-top:0}\n.ax .cta-contact dd{color:var(--white);font-weight:600;font-size:1.05rem}\n\/* toc for facts page *\/\n.ax .toc{display:flex;flex-wrap:wrap;gap:10px}\n.ax .toc a{border:1px solid var(--gray-700);padding:8px 16px;font-size:.85rem;color:var(--gray-100)}\n.ax .toc a:hover{border-color:var(--red);color:var(--white)}\n.ax .updated{font-size:.8rem;color:var(--gray-500);letter-spacing:1px;text-transform:uppercase}\n@media(max-width:1024px){:root{--container:90vw}.ax .g4{grid-template-columns:repeat(2,1fr)}.ax .g3{grid-template-columns:repeat(2,1fr)}.ax .statbar-inner{grid-template-columns:repeat(2,1fr)}.ax .related-grid{grid-template-columns:1fr}.ax .cta-grid{grid-template-columns:1fr}}\n@media(max-width:680px){:root{--container:88vw}.ax .g2,.ax .g3,.ax .g4{grid-template-columns:1fr}.ax .statbar-inner{grid-template-columns:1fr 1fr}}\n<\/style>\n<div class=\"ax\"><main>\n<section class=\"hero\"><div class=\"ax-wrap\">\n<div class=\"hero-label\">Enclosures to print<\/div>\n<h1>Custom sheet metal <span>enclosures and cabinets<\/span><\/h1>\n<p class=\"hero-sub\">Housings, control cabinets, covers and consoles built to your drawing, with the inserts fitted, the seams ground, the paint cured and the panel already fitting the door.<\/p>\n<div class=\"hero-ctas\"><a class=\"btn btn-primary\" href=\"\/en\/request-a-quote\">Quote my enclosure<\/a><a class=\"btn btn-ghost\" href=\"\/en\/oem-manufacturing\/quality-inspection-export-packing\">Quality and packing<\/a><\/div>\n<div class=\"byline\">Written and technically reviewed by <strong>Georgios Nikolaidis<\/strong>, founder, general manager and mechanical engineer, <a href=\"\/en\/contact\">Axinar S.A.<\/a> &middot; Last updated 15 September 2026<\/div>\n<\/div><\/section><div class=\"statbar\"><div class=\"statbar-inner\"><div class=\"stat\"><div class=\"stat-val\">0.5<small>mm<\/small><\/div><div class=\"stat-label\">Thinnest sheet we cut and bend<\/div><\/div><div class=\"stat\"><div class=\"stat-val\">\u00b10.1<small class=\"sym\">\u00b0<\/small><\/div><div class=\"stat-label\">Bend angle, laser angle measurement<\/div><\/div><div class=\"stat\"><div class=\"stat-val\">60-120<small>\u00b5m<\/small><\/div><div class=\"stat-label\">Powder coating, full RAL range<\/div><\/div><div class=\"stat\"><div class=\"stat-val\">M3-M8<\/div><div class=\"stat-label\">PEM inserts and rivet nuts fitted in-house<\/div><\/div><\/div><\/div><section class=\"section\" style=\"padding-top:clamp(34px,3vw,56px);padding-bottom:0\"><div class=\"ax-wrap\"><div class=\"answer-box\"><div class=\"answer-label\">Short answer<\/div><p>Axinar manufactures custom sheet metal enclosures, electrical cabinets and machine housings to customer drawings. Panels are laser cut at \u00b10.1 mm and bent at \u00b10.1\u00b0 with laser angle measurement, PEM inserts and rivet nuts from M3 to M8 are fitted before coating, and powder coating is applied in-house at 60 to 120 \u00b5m in any RAL colour.<\/p><\/div><\/div><\/section><section class=\"section\"><div class=\"ax-wrap\"><div class=\"section-label\">The real problem<\/div><h2>An enclosure is judged on fit, not on the flat pattern<\/h2><div class=\"prose\"><p>Any shop can cut the panels of a cabinet. The parts that decide whether your assembly line runs are the ones nobody quotes: whether the door gap is even along its whole length, whether the PEM nuts sit square so the standoffs do not fight the PCB, whether the paint is inside the threads, whether the second batch is identical to the first.<\/p><p>We build enclosures the way the drawing intends. Panels are laser cut at \u00b10.1 mm and bent on CNC press brakes with <strong>laser angle measurement that compensates springback in real time<\/strong>, so the first box is as square as the thousandth. Self-clinching inserts, rivet nuts, stud welds and helicoils are fitted before coating and masked during it. Seams that will be visible are welded and ground, and for thin sheet we use handheld laser welding, which leaves almost nothing to grind.<\/p><p>Coating is ours: sandblasting and phosphating, GEMA electrostatic application, oven curing at 180 to 200 \u00b0C, 60 to 120 \u00b5m in the full RAL range, Qualicoat and Qualisteelcoat processes. For outdoor enclosures we work in galvanized sheet, stainless steel or hot-dip galvanized steel to EN ISO 1461.<\/p><\/div><\/div><\/section><section class=\"section alt\"><div class=\"ax-wrap\"><div class=\"section-label\">What we build<\/div><h2>Enclosure types we run<\/h2><div class=\"grid g3\"><div class=\"card\"><h3>Electrical and control cabinets<\/h3><p>Mounting plates, DIN rail supports, cable entries, gland plates, locks and hinges fitted, earthing studs welded.<\/p><\/div><div class=\"card\"><h3>Machine housings and covers<\/h3><p>Guards, covers and cladding that follow a machine frame, with windows, cutouts and access panels.<\/p><\/div><div class=\"card\"><h3>Outdoor enclosures<\/h3><p>Galvanized, Magnelis or stainless bodies with lapped roofs and drip edges, coated for UV and coastal exposure.<\/p><\/div><div class=\"card\"><h3>Consoles and operator panels<\/h3><p>Bent and welded housings for HMI screens and controls, with laser-marked legends and clean visible seams.<\/p><\/div><div class=\"card\"><h3>Equipment cabinets in stainless<\/h3><p>304 and 316 cabinets for food, pharmaceutical and marine environments, brushed to a defined grain direction.<\/p><\/div><div class=\"card\"><h3>Boiler and heating enclosures<\/h3><p>The insulated bodies we already build in series for our own heating range and for an Austrian OEM brand.<\/p><\/div><\/div><\/div><\/section><section class=\"section\"><div class=\"ax-wrap\"><div class=\"section-label\">Specification<\/div><h2>Materials, thickness and finishing options<\/h2><div class=\"tablewrap\"><table><caption>Standard enclosure specification envelope<\/caption><thead><tr><th>Item<\/th><th>Range<\/th><th>Notes<\/th><\/tr><\/thead><tbody><tr><td>Sheet materials<\/td><td>Mild steel, DX51D galvanized, stainless 304 and 316, aluminium, Magnelis<\/td><td>Pre-coated sheet handled with protective film through cutting and bending<\/td><\/tr><tr><td>Thickness<\/td><td>0.5 to 6 mm typical for enclosure bodies, thicker for bases and brackets<\/td><td>Laser cuts mild steel up to 40 mm for the structural parts of the same project<\/td><\/tr><tr><td>Panel size<\/td><td>Up to 4,000 \u00d7 2,000 mm cut, up to 4,000 mm bend length<\/td><td>Large panels in one piece means no visible splice on long bodies<\/td><\/tr><tr><td>Inserts<\/td><td>PEM self-clinching nuts and studs, rivet nuts M3 to M8, stud welding, helicoil<\/td><td>Fitted before coating, masked during coating<\/td><\/tr><tr><td>Coating<\/td><td>Powder coat 60 to 120 \u00b5m, full RAL, matt, satin or gloss, texture on request<\/td><td>Sandblasting and phosphating pre-treatment in-house<\/td><\/tr><tr><td>Marking<\/td><td>Laser marking for serial numbers, logos and legends<\/td><td>Used for traceability on series production<\/td><\/tr><\/tbody><\/table><\/div><\/div><\/section><section class=\"section alt\"><div class=\"ax-wrap\"><div class=\"section-label\">Before you send<\/div><h2>Details that change an enclosure price<\/h2><div class=\"prose\" style=\"margin-bottom:22px\"><p>Enclosures are the product family where a short note in the RFQ saves the most money. These are the six that move the number the most.<\/p><\/div><ul class=\"checks\"><li><strong>Which seams are visible<\/strong>, because ground-and-filled seams cost real time<\/li><li><strong>Flatness and gap requirements<\/strong> on doors and covers, stated as a number, not as good quality<\/li><li><strong>Insert list<\/strong>, thread sizes and positions, and whether threads must be paint free<\/li><li><strong>RAL number and gloss level<\/strong>, inside and outside, and whether the inside stays raw<\/li><li><strong>Assembly level<\/strong>, flat pack, welded body only, or fully assembled with hardware fitted<\/li><li><strong>Batch and call-off plan<\/strong>, since enclosures nest far better when quantities are known<\/li><\/ul><\/div><\/section><section class=\"section faq\"><div class=\"ax-wrap\"><div class=\"section-label\">Questions we get<\/div><h2>Frequently asked questions<\/h2><details><summary>Can you work from a 3D model without drawings?<\/summary><div class=\"answer\"><p>Yes for the geometry, but an enclosure almost always needs a short specification next to the model: the RAL colour, which threads must stay clean, what the door gap has to be, and what is assembled before shipping. Send the model and a one-page note and we will fill in the rest with questions.<\/p><\/div><\/details><details><summary>Do you supply IP-rated enclosures?<\/summary><div class=\"answer\"><p>We build to your specification, including gasket channels, continuous sealed welds, lapped roofs and drip edges. Where you need a rating verified, specify the target IP class and the test in the RFQ so the design and the test are quoted together, rather than assumed.<\/p><\/div><\/details><details><summary>Can you fit hardware, gaskets and glass?<\/summary><div class=\"answer\"><p>Yes. Hinges, locks, gas springs, gaskets, glass, mounting plates and cable glands are fitted in the assembly cell, either from components you supply or bought to your approved vendor list.<\/p><\/div><\/details><details><summary>What is the smallest enclosure order you take?<\/summary><div class=\"answer\"><p>A single prototype cabinet is normal work, it runs on the same machines as series production. If you expect a series afterwards, say so at RFQ stage, because we then design the tooling and the flat patterns for the series rather than for the one-off.<\/p><\/div><\/details><details><summary>Do you coat both sides and mask threads?<\/summary><div class=\"answer\"><p>Both sides is standard unless you tell us the inside stays raw or galvanized. Threads, earthing points, sealing faces and machined datums are masked on request, which should be marked on the drawing or listed in the RFQ.<\/p><\/div><\/details><details><summary>Can you laser mark serial numbers for traceability?<\/summary><div class=\"answer\"><p>Yes. Laser marking of serial numbers, part numbers, logos and legends is in-house, and it is what we use to tie a finished unit back to its inspection record on series production.<\/p><\/div><\/details><\/div><\/section><section class=\"section alt\"><div class=\"ax-wrap\"><div class=\"section-label\">Related<\/div><h2>Where to go next<\/h2><div class=\"related-grid\"><a href=\"\/en\/oem-manufacturing\/welded-metal-assemblies\"><span>Assemblies<\/span>Welded metal assemblies and frames<\/a><a href=\"\/en\/oem-manufacturing\/metal-parts-from-step-dxf-files\"><span>Made to drawing<\/span>Metal parts from STEP, DXF and PDF files<\/a><a href=\"\/en\/oem-manufacturing\/quality-inspection-export-packing\"><span>Quality<\/span>Quality, inspection and export packing<\/a><\/div><\/div><\/section><section class=\"section cta\"><div class=\"ax-wrap\"><div class=\"cta-grid\">\n<div><div class=\"section-label\">Request a quote<\/div><h2>Send your files, get a real quotation<\/h2><div class=\"prose\"><p>Upload STEP or DXF files, tell us material, thickness, finish and quantity, and our engineers return a quotation with manufacturability notes. If a small change to a bend radius or a hole position saves you money, we tell you before you order.<\/p><p>Every enquiry is covered by an NDA from the first file.<\/p><\/div>\n<div class=\"hero-ctas\" style=\"margin-top:26px\"><a class=\"btn btn-primary\" href=\"\/en\/request-a-quote\">Send your drawings<\/a><a class=\"btn btn-ghost\" href=\"\/en\/oem-manufacturing\">OEM overview<\/a><\/div><\/div>\n<div class=\"cta-contact\"><dl>\n<dt>Email<\/dt><dd><a href=\"mailto:sales@axinar.com\">sales@axinar.com<\/a><\/dd>\n<dt>Phone<\/dt><dd><a href=\"tel:+302310808159\">+30 2310 808 159<\/a><\/dd>\n<dt>Files we accept<\/dt><dd>STEP, DXF, DWG, IGES, SLDPRT, PDF<\/dd>\n<dt>Factory<\/dt><dd>Bi.Pa. Oraiokastrou 1055, 57013 Thessaloniki, Greece<\/dd>\n<\/dl><\/div><\/div><\/div><\/section>\n<\/main><\/div>\n<script type=\"application\/ld+json\">{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@graph\": [\n    {\n      \"@type\": \"BreadcrumbList\",\n      \"@id\": \"https:\/\/axinar.com\/en\/oem-manufacturing\/custom-sheet-metal-enclosures#breadcrumb\",\n      \"itemListElement\": [\n        {\n          \"@type\": \"ListItem\",\n          \"position\": 1,\n          \"name\": \"Home\",\n          \"item\": \"https:\/\/axinar.com\/en\"\n        },\n        {\n          \"@type\": \"ListItem\",\n          \"position\": 2,\n          \"name\": \"OEM Manufacturing\",\n          \"item\": \"https:\/\/axinar.com\/en\/oem-manufacturing\"\n        },\n        {\n          \"@type\": \"ListItem\",\n          \"position\": 3,\n          \"name\": \"Custom sheet metal enclosures\",\n          \"item\": \"https:\/\/axinar.com\/en\/oem-manufacturing\/custom-sheet-metal-enclosures\"\n        }\n      ]\n    },\n    {\n      \"@type\": \"WebPage\",\n      \"@id\": \"https:\/\/axinar.com\/en\/oem-manufacturing\/custom-sheet-metal-enclosures#webpage\",\n      \"url\": \"https:\/\/axinar.com\/en\/oem-manufacturing\/custom-sheet-metal-enclosures\",\n      \"name\": \"Custom sheet metal enclosures and cabinets\",\n      \"description\": \"Custom metal enclosures, cabinets and machine housings made to your drawing in Greece. Laser cut, CNC bent, welded, PEM inserts, powder coated in any RAL, delivered assembled across the EU.\",\n      \"inLanguage\": \"en\",\n      \"datePublished\": \"2026-09-15\",\n      \"dateModified\": \"2026-09-15\",\n      \"breadcrumb\": {\n        \"@id\": \"https:\/\/axinar.com\/en\/oem-manufacturing\/custom-sheet-metal-enclosures#breadcrumb\"\n      },\n      \"isPartOf\": {\n        \"@type\": \"WebSite\",\n        \"@id\": \"https:\/\/axinar.com\/#website\",\n        \"url\": \"https:\/\/axinar.com\",\n        \"name\": \"Axinar S.A.\"\n      },\n      \"about\": {\n        \"@id\": \"https:\/\/axinar.com\/#organization\"\n      },\n      \"provider\": {\n        \"@id\": \"https:\/\/axinar.com\/#organization\"\n      },\n      \"author\": {\n        \"@id\": \"https:\/\/axinar.com\/#person-gnikolaidis\"\n      },\n      \"reviewedBy\": {\n        \"@id\": \"https:\/\/axinar.com\/#person-gnikolaidis\"\n      },\n      \"lastReviewed\": \"2026-09-15\"\n    },\n    {\n      \"@type\": \"Person\",\n      \"@id\": \"https:\/\/axinar.com\/#person-gnikolaidis\",\n      \"name\": \"\u0393\u03b5\u03ce\u03c1\u03b3\u03b9\u03bf\u03c2 \u039d\u03b9\u03ba\u03bf\u03bb\u03b1\u0390\u03b4\u03b7\u03c2\",\n      \"alternateName\": \"Georgios Nikolaidis\",\n      \"jobTitle\": \"Founder, General Manager and Mechanical Engineer\",\n      \"email\": \"gn@axinar.com\",\n      \"telephone\": \"+30-2310-808159\",\n      \"url\": \"https:\/\/axinar.com\/en\/contact\",\n      \"worksFor\": {\n        \"@id\": \"https:\/\/axinar.com\/#organization\"\n      },\n      \"affiliation\": {\n        \"@id\": \"https:\/\/axinar.com\/#organization\"\n      }\n    },\n    {\n      \"@type\": \"Service\",\n      \"@id\": \"https:\/\/axinar.com\/en\/oem-manufacturing\/custom-sheet-metal-enclosures#service\",\n      \"name\": \"Custom sheet metal enclosures, cabinets and machine housings\",\n      \"serviceType\": \"Sheet metal enclosure manufacturing\",\n      \"description\": \"Design-to-print manufacture of sheet metal enclosures, electrical cabinets, machine housings and covers in steel, galvanized steel, stainless steel and aluminium, with inserts, powder coating and assembly.\",\n      \"url\": \"https:\/\/axinar.com\/en\/oem-manufacturing\/custom-sheet-metal-enclosures\",\n      \"provider\": {\n        \"@type\": \"Organization\",\n        \"@id\": \"https:\/\/axinar.com\/#organization\",\n        \"name\": \"Axinar S.A.\",\n        \"url\": \"https:\/\/axinar.com\",\n        \"address\": {\n          \"@type\": \"PostalAddress\",\n          \"streetAddress\": \"Bi.Pa. Oraiokastrou 1055\",\n          \"postalCode\": \"57013\",\n          \"addressLocality\": \"Thessaloniki\",\n          \"addressCountry\": \"GR\"\n        },\n        \"email\": \"sales@axinar.com\",\n        \"telephone\": \"+30-2310-808159\"\n      },\n      \"areaServed\": [\n        {\n          \"@type\": \"Country\",\n          \"name\": \"Greece\"\n        },\n        {\n          \"@type\": \"Country\",\n          \"name\": \"Italy\"\n        },\n        {\n          \"@type\": \"Country\",\n          \"name\": \"Germany\"\n        },\n        {\n          \"@type\": \"Country\",\n          \"name\": \"France\"\n        },\n        {\n          \"@type\": \"Country\",\n          \"name\": \"Austria\"\n        },\n        {\n          \"@type\": \"Country\",\n          \"name\": \"Netherlands\"\n        },\n        {\n          \"@type\": \"Country\",\n          \"name\": \"Belgium\"\n        },\n        {\n          \"@type\": \"Country\",\n          \"name\": \"Spain\"\n        },\n        {\n          \"@type\": \"Country\",\n          \"name\": \"Sweden\"\n        },\n        {\n          \"@type\": \"Country\",\n          \"name\": \"Denmark\"\n        },\n        {\n          \"@type\": \"Country\",\n          \"name\": \"Romania\"\n        },\n        {\n          \"@type\": \"Country\",\n          \"name\": \"Bulgaria\"\n        },\n        {\n          \"@type\": \"Country\",\n          \"name\": \"Cyprus\"\n        }\n      ],\n      \"availableChannel\": {\n        \"@type\": \"ServiceChannel\",\n        \"serviceUrl\": \"https:\/\/axinar.com\/en\/request-a-quote\",\n        \"name\": \"Request for quotation\"\n      },\n      \"hasOfferCatalog\": {\n        \"@type\": \"OfferCatalog\",\n        \"name\": \"Enclosure manufacturing\",\n        \"itemListElement\": [\n          {\n            \"@type\": \"Offer\",\n            \"itemOffered\": {\n              \"@type\": \"Service\",\n              \"name\": \"Electrical and control cabinets\"\n            }\n          },\n          {\n            \"@type\": \"Offer\",\n            \"itemOffered\": {\n              \"@type\": \"Service\",\n              \"name\": \"Machine housings and covers\"\n            }\n          },\n          {\n            \"@type\": \"Offer\",\n            \"itemOffered\": {\n              \"@type\": \"Service\",\n              \"name\": \"Outdoor enclosures in galvanized and stainless steel\"\n            }\n          },\n          {\n            \"@type\": \"Offer\",\n            \"itemOffered\": {\n              \"@type\": \"Service\",\n              \"name\": \"PEM insert and rivet nut fitting\"\n            }\n          },\n          {\n            \"@type\": \"Offer\",\n            \"itemOffered\": {\n              \"@type\": \"Service\",\n              \"name\": \"Powder coating in RAL colours\"\n            }\n          },\n          {\n            \"@type\": \"Offer\",\n            \"itemOffered\": {\n              \"@type\": \"Service\",\n              \"name\": \"Laser marking and serial numbers\"\n            }\n          }\n        ]\n      }\n    },\n    {\n      \"@type\": \"FAQPage\",\n      \"@id\": \"https:\/\/axinar.com\/en\/oem-manufacturing\/custom-sheet-metal-enclosures#faq\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can you work from a 3D model without drawings?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes for the geometry, but an enclosure almost always needs a short specification next to the model: the RAL colour, which threads must stay clean, what the door gap has to be, and what is assembled before shipping. Send the model and a one-page note and we will fill in the rest with questions.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Do you supply IP-rated enclosures?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"We build to your specification, including gasket channels, continuous sealed welds, lapped roofs and drip edges. Where you need a rating verified, specify the target IP class and the test in the RFQ so the design and the test are quoted together, rather than assumed.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can you fit hardware, gaskets and glass?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes. Hinges, locks, gas springs, gaskets, glass, mounting plates and cable glands are fitted in the assembly cell, either from components you supply or bought to your approved vendor list.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What is the smallest enclosure order you take?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"A single prototype cabinet is normal work, it runs on the same machines as series production. If you expect a series afterwards, say so at RFQ stage, because we then design the tooling and the flat patterns for the series rather than for the one-off.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Do you coat both sides and mask threads?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Both sides is standard unless you tell us the inside stays raw or galvanized. Threads, earthing points, sealing faces and machined datums are masked on request, which should be marked on the drawing or listed in the RFQ.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can you laser mark serial numbers for traceability?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes. Laser marking of serial numbers, part numbers, logos and legends is in-house, and it is what we use to tie a finished unit back to its inspection record on series production.\"\n          }\n        }\n      ]\n    }\n  ]\n}<\/script>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"<p>Enclosures to print Custom sheet metal enclosures and cabinets Housings, control cabinets, covers and consoles built to your drawing, with [&hellip;]<\/p>\n","protected":false},"author":16,"featured_media":0,"parent":3037,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_eb_attr":"","site-sidebar-layout":"no-sidebar","site-content-layout":"","ast-site-content-layout":"full-width-container","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"","ast-featured-img":"disabled","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"rank_math_title":"Custom Sheet Metal Enclosures & Cabinets | Built to Drawing in Greece","rank_math_description":"Custom metal enclosures, cabinets and machine housings made to your drawing in Greece. Laser cut, CNC bent, welded, PEM inserts, powder coated in any RAL, delivered assembled across the EU.","footnotes":""},"class_list":["post-8405","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/axinar.com\/en\/wp-json\/wp\/v2\/pages\/8405","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/axinar.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/axinar.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/axinar.com\/en\/wp-json\/wp\/v2\/users\/16"}],"replies":[{"embeddable":true,"href":"https:\/\/axinar.com\/en\/wp-json\/wp\/v2\/comments?post=8405"}],"version-history":[{"count":1,"href":"https:\/\/axinar.com\/en\/wp-json\/wp\/v2\/pages\/8405\/revisions"}],"predecessor-version":[{"id":8414,"href":"https:\/\/axinar.com\/en\/wp-json\/wp\/v2\/pages\/8405\/revisions\/8414"}],"up":[{"embeddable":true,"href":"https:\/\/axinar.com\/en\/wp-json\/wp\/v2\/pages\/3037"}],"wp:attachment":[{"href":"https:\/\/axinar.com\/en\/wp-json\/wp\/v2\/media?parent=8405"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}